The Ghost Immobiliser
Immobilisers are a powerful tool to fight vehicle theft. They stop the vehicle from starting if the isn't equipped with an ignition key fob. They also work well to stop hotwiring or traditional types of vehicle theft. Innovative methods like relay theft or key cloning are becoming more common.
Created to counter these current trends The ghost immobiliser works to make your vehicle inaccessible. It doesn't rely on LED indicators or radio signals or key fobs and is quiet and stealthy.
Easy to install
The Ghost Immobiliser is an innovative device that connects to the CAN data network inside your vehicle to stop key theft and cloning. It is an TASSA approved product and is endorsed by insurance companies. It is silent and virtually undetectable to thieves. It uses buttons on your steering wheel and center console to generate a unique pin-code sequence that you have to enter before you can begin the vehicle. You can create up to 20 different sequences to provide greater security. It's easy to install and doesn't require additional hardware.
It is recommended to use a reputable installer of CAN immobilisers that is skilled in the specific type of vehicle you have to get the most effective results. Ideally, they will have a workshop close to you that you can visit to have your installation completed. They'll also have a variety of tools and equipment to aid you during the installation process. These include basic hand tools, a multimeter, and insulation tape and heat shrink tubing to safeguard connections. A user's manual will give you the necessary instructions for the wiring in your vehicle.
Before starting the installation Before beginning the installation, disconnect the battery to prevent short circuits and airbag deployment. Double-checking the CAN L and CAN H wires is vital, as incorrect identification can lead to improper integration of the system. It is also a good idea to label or mark the wires. Finally, utilize a multimeter for verification that the power source you have identified has a reliable 12V supply.
Advanced thieves can use a variety of tactics to bypass the Ghost Immobiliser, which includes jamming and spoofing signals. These techniques work by amplifying the signal that is transmitted from your key fob to the electronic control unit of your vehicle. However, with the latest anti-jamming technologies and a constant monitoring you can shield your vehicle from these sophisticated attacks.
Security Enhanced
Ghost immobilisers provide an additional layer of security to protect your vehicle from theft. It uses an PIN code protection system that is activated by pressing buttons on your dashboard or steering wheel which makes it difficult for thieves to access the device and take your vehicle. The device is also designed to be hidden within your vehicle, without lights or other indicators that would warn thieves of its presence. It communicates with your car's ECU on the data bus, so it isn't susceptible to the same hacking or relay attacks that can cripple traditional security systems.
It's a great investment for those who have expensive automobiles which are at greater risk of theft due to their value and the popularity of their vehicles. Its enhanced features protect your vehicle from key duplicates and ECU swapping. Some ghost immobilisers may be paired with an app, allowing you can easily arm and disarm them. They can include a service/valet setting that allows you temporarily deactivate the immobiliser during repairs or maintenance.
Ghost immobilisers have another great feature: it doesn't require any wire cutting. This is a fantastic feature, especially if the car is newer and does not come with an immobiliser. Certain systems are capable of integrating with the GPS tracking device, thereby providing an additional level of security for your vehicle. A GPS tracker may also reduce the cost of insurance. If you choose to buy a ghost immobiliser, ensure that it's TASSA-certified and an expert installer installs the device for you.
Compatible with all major brands and models
The Ghost Immobiliser has been designed to work with all major brands and models of vehicles, safeguarding your pride and joy against theft. It creates a unique pin code using buttons on your steering wheel, console or door panels. You must enter the code before you can drive. The system is tamper-proof, undetectable and backed by three-year guarantee. It is also fully endorsed by insurance providers, which means that it can lower your insurance premiums.
The Ghost system differs from the standard immobilisers that use the key fob to provide ignition control. It is directly connected to the engine controller via the CAN bus. It is nearly impossible to remove, disable or hack. The Ghost system can also be paired with an iPhone app for remote monitoring and management.
You can set an PIN code that is simple for you to remember but mathematically impossible for thieves to guess. The PIN can be customised and changed at any point and you can ensure your vehicle is secure even if it's parked on the street or in a public parking lot. You can also select the valet or service mode in the event that you need someone else to drive your vehicle temporarily for instance, when it is in the garage. This feature can also help prevent your car from being taken by a dishonest mechanic. You can choose the Ghost Call alert to give you extra peace of mind. It will inform you when your car is moving or has been moved.
Convenience
The ghost immobiliser guards your vehicle from common theft techniques like key replication or relay attacks. It is activated by connecting to the car's CAN data network and blocking communication with the engine ECU. This makes it difficult for thieves to duplicate or hack your vehicle, making the installation of this system a great idea for any driver.
After installation, you'll need to enter a PIN number up to 20 digits using the buttons on your dashboard or steering wheel in order to start the engine. The system is completely hidden and therefore unnoticeable by thieves. It does not emit radio frequency signals. It can be set up with a PIN number that can be altered by the user, which adds to its security. The system is designed to avoid cutting of circuits, making it virtually impossible to alter.
If you do get lost in your PIN, there are some systems that allow you to communicate with the immobiliser through an app on your phone and instantly disarm it. Some systems even have a valet/service setting that allows you to start your car, for example when you drop it off at Valet Park or a garage.
how much is a ghost immobiliser is also indetectable to thieves because it doesn't transmit radio signals, which is a significant advantage over other aftermarket vehicle security systems. It is also easy to use, and doesn't require any complicated wiring. It can be used conjunction with dash cams for added safety. Dash cam Thinkware F70 features clear and crisp 1080p HD footage Format Free Technology, and parking mode. The system can also be hardwired to ensure maximum performance and durability.
Installation
It is crucial to select the most reliable immobiliser ghost in order to shield your vehicle from thieves. This device can prevent car thefts by preventing communication between key fobs and the engine controller unit. This device prevents thieves from stealing the signal used to start your vehicle. It also detects any signs of manipulation and notify the owner of the vehicle.
The device is simple to install and integrates with your vehicle's existing systems. It does not require any modification to the vehicle's wiring and can be tucked away in a hidden area, like under the dashboard. Follow the instructions in the manual to make sure the device is installed correctly. It is also important to test the system following installing it. This will ensure that the immobiliser ghost is functioning as intended.
You can purchase an Autowatch Ghost 2 Immobiliser from an approved installer and get it installed on your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it difficult for thieves to take over the system or bypass it. Installation generally takes between 2 and 3 hours.
During the installation process, it is recommended to review the wiring diagram of your vehicle model. This will enable you to find the CAN High & the CAN Low wires needed to connect your Ghost to the engine of your vehicle. Make sure to double-check the connections to ensure that they are safe and well-insulated.
After the installation is completed and you are able to use the Ghost Immobiliser during normal operation. It will turn off your vehicle's ignition if it is not started with the correct PIN code, which you can set yourself. The immobiliser ghost cost can also be set to Service/Valet mode in the event that you have to surrender your vehicle for maintenance or valet parking.